Just looking to do some testing.
+2
nikecivic
Blawson
6 posters
Do we have a par meter locally?
Blawson- Donating Member
- Posts : 80
Join date : 2012-03-06
Age : 50
Location : Oxnard
nikecivic- Moderator
- Posts : 1672
Join date : 2011-11-09
Location : Camarillo, CA
contact MxReEfEr92
MxReEfEr92- Admin
- Posts : 1727
Join date : 2012-02-21
Age : 32
Location : Simi Valley
The one that the club has is pretty much useless, It has no screen and I have tried every setting on my multi meeter to try and figure it out. You are more than welcome to try it out, One thing I ask is for you to become a paid member of the club ($22). Jimmy and the little guy may be of more help then me on getting it to work.
Blawson- Donating Member
- Posts : 80
Join date : 2012-03-06
Age : 50
Location : Oxnard
Don't mind the $22. I am not great with electronics. I would be useless.
MxReEfEr92- Admin
- Posts : 1727
Join date : 2012-02-21
Age : 32
Location : Simi Valley
Ok you are more than welcome to pick up, now that school is im pretty busy.
dwolson2- Admin
- Posts : 2356
Join date : 2011-08-07
Location : Where ever I am told to go
It worked fine for me....
Blawson- Donating Member
- Posts : 80
Join date : 2012-03-06
Age : 50
Location : Oxnard
So... Does it work? I may have been too quick to act. I purchased one online.
dwolson2- Admin
- Posts : 2356
Join date : 2011-08-07
Location : Where ever I am told to go
LOL, you have to remove the Cap 
But you put the meter on ohms, then multiply bya number. I'm not sure what it is, but google would tell me.....
But you put the meter on ohms, then multiply bya number. I'm not sure what it is, but google would tell me.....
dwolson2- Admin
- Posts : 2356
Join date : 2011-08-07
Location : Where ever I am told to go
Cory when you pick up your inverts, bring it with, and I will try iton my tank.
MxReEfEr92- Admin
- Posts : 1727
Join date : 2012-02-21
Age : 32
Location : Simi Valley
I did remove the cap set it to ohms and nothing...
Blawson- Donating Member
- Posts : 80
Join date : 2012-03-06
Age : 50
Location : Oxnard
Let me know... I won't get mine for about a week and would like to try and test this weekend.
dwolson2- Admin
- Posts : 2356
Join date : 2011-08-07
Location : Where ever I am told to go
If you drop it off at my house, I can look at it.
sisterlimonpot- Admin
- Posts : 1576
Join date : 2011-07-25
Location : Oxnard
dwolson2 wrote:LOL, you have to remove the Cap
But you put the meter on mV (DC), then multiply by a number (5). I'm not sure what it is, but google would tell me.....
FTFY
MASVC has a par meter for the club members to use (one of the many benefits of being a MASVC member)
Set the meter to mV (direct current) and attach the 2 leads from the multimeter to the red and black wire of the par meter (most multimeter leads are red and black as well so it's as easy as hooking up red to red and black to black.) Don’t worry about the third wire on the par meter.
remove the cover of the par meter and place it where you want to take a reading. The multimeter display will give a value in millivolts (mV) and all you have to do is convert that number by multiplying it by 5 which will give you PAR.
calistyle- Posts : 42
Join date : 2012-10-01
Age : 42
Location : Simi Valley
what about the flux capacitor?
dwolson2- Admin
- Posts : 2356
Join date : 2011-08-07
Location : Where ever I am told to go
Your right Jimmy, my memory must be getting bad. I'm not sure how to program it, but it would be kind of cool to make the arduino do the math and make a "controller" for it...
sisterlimonpot- Admin
- Posts : 1576
Join date : 2011-07-25
Location : Oxnard
very simple stuff, we just need to get a small 3-4 number digital display and an atmega chip and we'll be in business.
Blawson- Donating Member
- Posts : 80
Join date : 2012-03-06
Age : 50
Location : Oxnard
Did we ever figure out if this worked?
sisterlimonpot- Admin
- Posts : 1576
Join date : 2011-07-25
Location : Oxnard
Yes it definitely works.